Testing and saving the control function
Testing and saving the control function
You can test your control function before uploading it to your Roboremote to see if it actions your robot the way you want. To do so:
1.Point Roboremote towards your robot and press the Playback button in the Roboremote software interface.
Your robot(s) should play back the movements of your control function you created using the Roboremote software.
2.Adjust the actions as necessary.You might want to add or remove actions from the timeline.
3.Save your control function.
For any additional control functions you want to create and store to your Roboremote, repeat the procedures for creating, assigning, testing and uploading control functions.
15