Playing the control function /
Roboremote software updates
Playing the control function
After you upload your control functions to your Roboremote software, you can use the Roboremote buttons to action your robot.
NOTE: Make sure your WowWee robot is turned on.
To playback your control function:
• Point Roboremote towards your robot and press the Roboremote button
to activate your
Your robot(s) should play back the movements
in the control function you created using the Roboremote software.
NOTE: The range from which Roboremote can control your WowWee robot is approximately the same as when you use the robot’s original remote controller and can vary, therefore consult the user manual of your robot for more details.
IMPORTANT: Make sure your Roboremote is pointing at your WowWee robot for the duration of the playback of your control function(s), otherwise your robot will not be able to receive signals from the Roboremote.
TIP: To have your robot continually repeat the control function, press and hold the button for half a second to which you saved the program. The LED indicator will cycle through the different colors as you hold the button down to indicate that it is repeating the control function.
Roboremote software updates
The Roboremote software will periodically check for updates, for instance to add new codes for newly released WowWee robots. When there are updates available for the software, the web update feature will automatically download and install any updates, including updated help files.
NOTE: This feature requires that your computer has an Internet connection.
16