BATTERY INSTALLATION
IMPORTANT! Use only a Power Wheels® 6 volt
(4.0 Amp/Hr) rechargeable battery. Use of any other battery will damage your vehicle.
Screws
Seat
1
•Loosen the screws located on the back end of the seat.
•Lift and remove the seat from the vehicle.
Battery
Retainer
2
• Loosen the screw in the battery retainer and remove it.
6Volt Battery
Battery
3Compartment
•Fit the Power Wheels® 6 volt (4.0 Amp/Hr) battery inside the battery compartment with the wires facing towards the rear of the vehicle.
Battery
Retainer
Battery
4
•Place the battery retainer over the battery.
•Replace the screw through the end of the battery retainer and into the vehicle.
•Tighten the screw.
12 |