Fisher-Price T4963 owner manual Wrench Lock Nut End of Steering Column Rounded Side Up

Page 9

ASSEMBLY

Wrench

Lock Nut

3

End of Steering

Column

Rounded Side Up

Pull Up

5	SIDE VIEW

•Turn the vehicle upright.

•Pull the handlebar up to be sure the steering column is secure.

•If you can remove the steering column, you have not assembled the steering column correctly. Please refer back to Assembly steps 2-4.

•Fit the lock nut (rounded side up) on to the end of the steering column.

•Tighten the lock nut firmly using the closed end of the wrench.

Steering

Column

Cap

4

•“Snap” the steering column cap over the steering column and onto front wheel assembly.

Handlebar Motor

Connector Connector

6	TOP VIEW

•Plug the handlebar connector into the motor connector.

•Replace the seat (refer to step 6 on page 13).

9	T4963a-0921

Image 9

Contents For Model T4963 With Assembly InstructionsPrevent Fire Important Information Electrical HazardImportant Information 16 Lock Nut PartsParts Picture Prevent Fire Battery Charging Electrical HazardBattery Retainer Battery ChargingScrews Seat ChargerSquare Slot Handlebar Connector AssemblyWrench Lock Nut End of Steering Column Rounded Side Up Handlebar Motor Connector ConnectorDecoration Decoration Battery 3Compartment Battery InstallationSeat Seat Tab 6Slot Screws Battery ConnectorBattery Disposal Battery Care Vehicle CareUse vehicle on generally level ground only Safe Driving Rules Riding HazardVehicle Operation Limited WarrantyProblem Possible Cause Solution Problems and Solutions GuideThermal fuse. Do not substitute parts Full charge Before first-time use You must charge the battery Hours