Fisher-Price M6784 instruction sheet Assembly

Page 5

 

Assembly

FIRST, insert the

Slot

screw so that 3/4" is

visible. THEN,

Handlebar

Headlight Cover

tighten the screw.

 

3/4"

 

Frame

Neck

Fork

Post

Fork Cover

Rear of Trike

9

11

Insert the fork post up through the hole in the neck of the frame. Make sure the fork is positioned so that the fork covers face the rear wheels.

Place the handlebar onto the fork post and push it down onto the frame. Make sure the handlebar is positioned so that the screw hole faces the rear wheels and aligns with the screw hole in the fork post.

Hint: You may need to rotate the handlebar to align the holes.

Insert the #8 x 3" screw through the hole in the handlebar and into the fork post so that part of the screw (about 3/4") is still visible. Tighten the screw.

Cap

10

• Insert and “snap” the cap into the hole in the frame.

Fit the tab on the headlight cover to the slot in the top of the handlebar.

Insert two #8 x 3/4" screws into the headlight cover. Tighten the screws.

Seat Retainer

Seat

Peg

Holes

12

Position the seat upside down.

Fit the small pegs on the seat retainer into the holes in the seat.

5

Image 5
Contents M6784 To avoid serious injury PartsPeg Side Down AssemblyPedal Hubs Pedal Axle Front Wheel Hole Assembly Label Decoration Attaching the Seat Battery Safety Information Battery ReplacementCare FCC StatementLets Go Removing the SeatConsumer Information