Fisher-Price M6784 instruction sheet Pedal Hubs Pedal Axle Front Wheel Hole

Page 4

Assembly

Pedal Hubs

Pedal Axle

Front Wheel

Hole

5

While holding the pedal hubs on the pedal axle, insert the

pedal axle through the hole in the center of the front wheel.

Push the pedal hubs into the center of the front wheel until they are flush with the surface of the front wheel.

Pedal Hub

Pedal Hub

Pedal

Pedal Axle

Scrap Block of Wood

7

Fit the pedal on the pedal axle. Tap the pedal with a hammer until it is secure.

Pull the pedal up to be sure it is secure. If you can remove it, you have not secured it properly. Tap it with the hammer again.

Fork Arms

Fork Cover

6

8

Groove

Pedal Axle

Turn the front wheel assembly over.

Insert the remaining pedal hubs on top of and below the pedal axle and into the hole in the center of the front wheel.

Push the pedal hubs into the center of the front wheel until they are flush with the surface of the front wheel.

Place the front wheel assembly between the fork arms. Make sure the pedal axle fits into the groove at the bottom of each fork arm.

Place a fork cover over the pedal axle on one fork arm.

Insert two #8 x 3/4" screws into the fork cover and tighten.

Repeat this procedure to attach the other fork cover to the other fork arm.

4

Image 4
Contents M6784 Parts To avoid serious injuryAssembly Peg Side DownPedal Hubs Pedal Axle Front Wheel Hole Assembly Label Decoration Attaching the Seat Battery Replacement Battery Safety InformationCare FCC StatementConsumer Information Removing the SeatLets Go