Fisher-Price M6784 instruction sheet Assembly, Peg Side Down

Page 3

Assembly

Rear Wheel

(Indented Side Down)

Hubcap

(Peg Side Up)

Rear Wheel

 

(Indented Side Up)

Cap Nut

Hubcap

(Peg Side Down)

Straight Axle

Frame

Cover

Hubcap

Assembled

Rear Wheel

1

Straight Axle

3

Scrap Block

Cap Nut

of Wood

Assembly Tool

 

Slide a hubcap (peg side up) onto the straight axle.

Slide a rear wheel (indented side down) onto the straight axle.

Frame

Turn the frame on its side with the exposed end of the straight axle up.

Place the cap nut assembly tool under the assembled rear wheel and onto the cap nut.

Slide a rear wheel (indented side up) onto the end of the straight axle.

Slide a hubcap (peg side down) onto the straight axle.

Place a cap nut on the end of the straight axle. Tap the cap nut with a hammer. Gently pull the rear wheel up to be sure the cap nut is securely attached to the straight axle.

Insert one of the tabs on a cover into a slot in the hubcap. Push to snap the cover into place. Repeat this procedure to attach the other cover to the other hubcap.

Hole

Hole

Pedal Hub

Pedal Axle

Tab

Straight Axle

2

BOTTOM VIEW

Turn the frame upside down.

Insert the straight axle through the holes in the rear of the frame.

Tab

Slot

Pedal Hub

4

Fit two pedal hubs onto the pedal axle tabs. Make sure the tabs fit into the slot in each pedal hub.

3

Image 3
Contents M6784 To avoid serious injury PartsPeg Side Down AssemblyPedal Hubs Pedal Axle Front Wheel Hole Assembly Label Decoration Attaching the Seat FCC Statement Battery ReplacementBattery Safety Information CareRemoving the Seat Consumer InformationLets Go