Fisher-Price M6784 instruction sheet Label Decoration Attaching the Seat

Page 6

Label Decoration

Attaching the Seat

11

9

8

(Place remaining

label 8’s on

opposite side of

front wheel)

10

(Place label 7 on

opposite side)

6(Place label 15

on opposite side)

16

12

(Place label 13

on opposite side)

14

1

4

(Place label 3

(Place label 2 on

on opposite side

opposite side)

of seat)

 

SIDE VIEW

 

5

Helpful Hint: The seat can be attached to the frame in any of three positions, depending on the size of your child. Check your child’s fit on the trike by observing the seat to pedal distance, as it is being ridden. If the pedals seem too far away or too close for your child, move the seat up or down.

SeatTabs

Seat

Retainer

Slots

Lower Position

Middle Position

Upper Position

 

 

 

At an angle, insert the tabs on the seat into any of the top three sets of slots for the lower, middle or upper position.

Lower the seat so that the seat retainer inserts and snaps into the slots in the frame.

Pull up on the seat to be sure it is secure.

DASH VIEW

Make sure the areas where the labels will be applied are clean and dry. Wipe your vehicle with a clean, soft, dry cloth to remove any dust or oils.

For best results, avoid applying a label more than once.

Apply the labels as shown in the illustration above.

After applying the label, rub the label firmly with a cloth to make sure the label is adhered to your vehicle.

6

Image 6
Contents M6784 Parts To avoid serious injuryAssembly Peg Side DownPedal Hubs Pedal Axle Front Wheel Hole Assembly Label Decoration Attaching the Seat Care Battery ReplacementBattery Safety Information FCC StatementRemoving the Seat Consumer InformationLets Go