
FASSEMBLY
| Hood Latches |
12 | Slots |
Lock
Fastener
14 |
Lock
Fastener
Unlocked | Locked |
|
|
•Insert a hood latch into each slot in the front end of the vehicle.
•Turn each hood latch a 1/4 turn to fit in place. Pull up on the hood latches to be sure they are secure.
•Using a slotted screwdriver, turn each lock fastener in the hood
1/4 turn to the locked
position.
IMPORTANT! Remember to keep the lock fasteners locked at all times to prevent children from accessing the vehicle battery compartment.
Dashboard Slots
Hood Tabs
13 ![]()
![]()
•Insert the tabs on the rear edge of the hood into the slots in the front of the dashboard.
•Pull the hood forward. Lower the hood closed.
15 | Brush Guard |
•Fit the brush guard to the front end of the vehicle.
Hint: Using the end of a Phillips screwdriver, poke a hole in the thin plastic covering over the lower holes in the brush guard.
•Insert two #10 x 1" screws through the lower holes in the brush guard and into the front end of the vehicle. Tighten the screws.
12 | |
|
|