Fisher-Price K4564 owner manual Spacers, Holder, Backpack

Page 13

ASSEMBLYF

ASpacers

16	B #8 x 4" Screws

• Fit the spacers between the upper holes of the brush guard and the front end of the vehicle A .

•Insert two #8 x 4" screws through the two upper holes in the brush guard, through the spacers and into the front end of the vehicle B . Tighten the screws.

Holder

18

•Fit the holder to the top edge of the vehicle as shown.

•Insert a #10 x 1" screw into the holder and tighten.

•Replace Backpack in the holder.

Backpack

17

•Using safety scissors, cut the plastic tie holding Backpack in the holder. Remove Backpack from the holder.

Note to Retailer: Do not remove the plastic tie. Simply lift Backpack from the holder and assemble the holder to the top edge of the vehicle. Replace Backpack in the holder.

K4564pr-0923

13

Image 13

Contents For Model K4564 With Assembly InstructionsImportant Information Table of ContentsElectrical Hazard Windshield CpartsTable Ofpartscontents Parts Picture Vehicle Steering Column Volt BatteryDashboard Steering Wheel Spacer Windshield Steering Wheel Cap Backpack HolderYour Power Wheels 6 volt battery with A-style connector Battery ChargingIncorrect Tablebatteryof ChargingontentsSeat Tabs Slots AssemblyfRoll Bar Hole End of Steering Column 32 x 1½ Pin FassemblySteering Wheel Cap Steering column in place Turn the vehicle uprightFit the end of the steering column through the hole Steering linkage VehicleDashboard Slots Hood Tabs Lock Fastener Unlocked LockedFit the brush guard to the front end of the vehicle Holder SpacersBackpack Gdecoration Decorationg Power Wheels Volt Battery Battery InstallationBattery Connector Motor Harness Plug the battery connector into the motor harness connectorBattery Battery Care and DisposalAlways sit on the seat Always wear shoes Safe Driving RulesDo not allow any child to drive the vehicle in the dark Reverse Forward Vehicle Operation Vehicle CareBUMPER-TO-BUMPER* Limited Warranty Problem Possible Cause Solution Problems and Solutions GuideOpperating the vehicle again. To avoid repeated automatic Check all connectors. Make sure the battery connector Before first-time use You must charge the battery Hours