Assembly
| Hubs | Pad |
|
| |
| Press Buttons |
|
Plastic |
|
|
Housing | Seat Frame Tubes |
|
|
| |
|
| Crotch |
|
| Restraint |
8
•Position the frame assembly so that the curved, front base is towards you.
•Fit the seat frame tubes into the hubs on the frame assembly.
•Press the upper buttons on the seat frame tubes and insert them into the hubs on the frame assembly until they “snap” into place. Make sure you hear a “snap” on both sides.
Hubs
Insert Screws
Seat Frame Tubes
10
•Decide which side of the reversible pad you will use. One side of the pad has a soft, cotton material with ruffle (for swing use); the other side is a wipeable vinyl material (for high chair use).
•Fit the pocket on the back of the reversible pad onto the seat back.
•Insert the crotch restraint through the large rectangular opening in the pad.
| Waist Restraints |
11 |
|
Fastener | Fastener |
9
#8 x 11/4" Screw – 2
Shown Actual Size
• Insert a screw into each hub and each seat frame tube.
•Tighten the screws with a Phillips screwdriver. Do not
6
•Fit the waist restraints through the smaller slots in the reversible pad.
•Fasten the fasteners on the sides of the reversible pad to the back of the seat.
•Fit the bottom edge of the reversible pad around the bot- tom edge of the seat.
Assembly is now complete.
IMPORTANT! Before