Assembly
IMPORTANT! Before assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact
Front Legs
Tapered End
Press
Button
Press
Button
Tapered End
1
Front Base
•Place the front base on a flat surface.
•Position a front leg so that the tapered end is downward, as shown.
•While pressing the button on one of the front legs, insert it into the front base. Push down on the front leg until the button “snaps” into the hole in the front base.
•Repeat this procedure to assemble the other front leg to the front base.
Pull Up
Front Legs | Pull Up |
2 | Front Base |
|
•While standing on the front base, pull the front legs up. The front legs should remain secured to the front base. If you can remove the front legs, you have not assembled them correctly to the front base. Reread and repeat assembly step 1.
| Hubs |
Rear Leg |
|
with | Rear Leg |
Housing | with |
| Motor |
| Housing |
| Press |
| Buttons |
| Slot |
Front
Legs
3
•Position the rear leg with housing so that the hub is inward.
•While pressing the upper button on front leg, insert it into the rear leg with housing slot, as shown. Push the front leg until the button “snaps” into the hole in the rear leg with housing.
•Repeat this procedure to assemble the rear leg with motor housing to the other front leg.
•Pull the front legs down to be sure they are secure in the housings. If you can remove them, you have not assembled them correctly. Please
Pull |
|
Rear | Pull |
Leg | |
| Rear |
| Leg |
4
• Pull both rear legs out until they “snap” into place.
4