High Chair Setup and Use
WARNING
Prevent serious injury or death from falls or sliding out.
•The child should be secured in the high chair at all times by the restrain- ing system. The restraint belts must be adjusted to fit your child snugly. The tray is not designed to hold the child in the chair.
•Always keep child in view while in the high chair.
•Never leave child unattended.
•It is recommended that the product is used as a high chair only by children capable of sitting upright unassisted.
Converting from Swing to High Chair
Seat Tube
Lift
B Press
Seat
Tube
Button
Lift
1
•Lift the seat 
and then press the buttons on the back side of the seat tubes to release the seat B .
•Lift the seat again 
.
2
•Continue to lift the seat 
until it rotates forward 
. The notches in the hubs will align with the plastic ridge on the seat frame tubes.
•Again, lift 
the seat until it “snaps” into place. The seat is now in the lower high chair position.
Press
Seat
Tube
Button
3
•For the upper high chair position, simply press the buttons on the front side of the seat frame tubes and lift the seat until it “snaps” into place.
9