Assembly
Rear 
Legs
Press
Buttons
5
Front | Rear Base |
Base |
|
•Place the rear base on a flat surface, as shown.
•While pressing the buttons on each side of the rear base, fit the rear legs onto the rear base. Push the rear legs down until the buttons on the rear base “snap” into the holes in each rear leg.
Seat
Hub
Press Upper
Button
Press Middle
Button
Press Lower
Button
7
Seat Frame Tubes
Seat
Hub
Press Upper
Button
Press Middle
Button
Press Lower
Button
Pull Up
Pull Up
Rear Legs
6
Rear Base
•While standing on the rear base, pull the rear legs up. They should remain secured to the rear base. If you can remove the rear legs, you have not assembled them cor- rectly to the rear base.
•Set the frame assembly aside for Assembly step 8.
• Position the seat frame on a flat surface.
• Fit the hole in the seat hubs onto the seat frame tubes.
• Press the upper buttons on the seat frame tubes and slide the seat down.
•Press the middle buttons on
the seat frame tubes and slide the seat down.
•Press the lower buttons on the seat frame tubes and slide the seat down.
•The seat should be touching the footrest.
5