Cisco Systems 12.4 manual Enables the LDP for interfaces that belong to an IS-IS

Page 65

Disabling MPLS LDP Autoconfiguration from Selected IS-IS Interfaces

How to Configure MPLS LDP Autoconfiguration

Step 10

Step 11

Command or Action

Purpose

 

 

mpls ldp autoconfig [level-1 level-2]

Enables the LDP for interfaces that belong to an IS-IS

 

process.

Example:

 

Router(config-router)# mpls ldp autoconfig

 

 

 

end

Exits router configuration mode and returns to privileged

 

EXEC mode.

Example:

 

Router(config-router)# end

 

 

 

Disabling MPLS LDP Autoconfiguration from Selected IS-IS Interfaces

When you issue the mpls ldp autoconfig command, all the interfaces that belong to an IS-IS process are enabled for LDP. To remove LDP from some interfaces, use the no mpls ldp igp autoconfig command on those interfaces. The following configuration steps show how to disable LDP from some of the interfaces after they were configured with the MPLS LDP Autoconfiguration feature with the mpls ldp autoconfig command.

SUMMARY STEPS

1.enable

2.configure terminal

3.interface type number

4.no mpls ldp igp autoconfig

5.end

DETAILED STEPS

 

Command or Action

Purpose

Step 1

 

 

enable

Enables privileged EXEC mode.

 

 

• Enter your password if prompted.

 

Example:

 

 

Router> enable

 

Step 2

 

 

configure terminal

Enters global configuration mode.

 

Example:

 

 

Router# configure terminal

 

 

 

 

MPLS LDP Configuration Guide, Cisco IOS Release 12.4

59

Page 64 Page 66
Image 65
Page 64 Page 66
Contents Mpls LDP Configuration Guide, Cisco IOS Release Page N T E N T S Mpls LDP Inbound Label Binding Filtering Mpls LDP Graceful Restart Contents Mpls LDP Configuration Guide, Cisco IOS Release Information About Mpls LDP Finding Feature InformationPrerequisites for Mpls LDP Mpls LDP Functional Overview Introduction to Mpls LDPLDP and TDP Support Train and ReleaseTrain and Release LDP/TDP Support Introduction to LDP SessionsNondirectly Connected Mpls LDP Sessions Enabling Directly Connected LDP Sessions, How to Configure Mpls LDPExample Step Command or Action PurposeEnabling Directly Connected LDP Sessions Step Command or Action PurposeExamples Step Command or ActionEstablishing Nondirectly Connected Mpls LDP Sessions Mpls label protocol ldp tdp both Interface tunnelnumber Tunnel destination ip-address Saving Configurations Mpls Tag Switching Commands Specifying the LDP Router ID Routerconfig# mpls ldp Router-id pos2/0/0 Following example displays the LDP router ID Preserving QoS Settings with Mpls LDP Explicit NullInterface type number Command or Action Purpose Local Outgoing Prefix Protecting Data Between LDP Peers with MD5 Authentication Summary Steps Mpls ldp neighbor vrf vpn-nameip Configuring Directly Connected Mpls LDP Sessions Example Mpls LDP Configuration ExamplesRouter 3 Configuration Router 1 ConfigurationRouter 2 Configuration Establishing Nondirectly Connected Mpls LDP Sessions Example Router 6 Configuration Router 4 ConfigurationRouter 5 Configuration Additional References Technical Assistance Description Link Feature Information for Mpls Label Distribution ProtocolRouter-id Releases Feature InformationFeature Name Releases Feature Name Releases Feature Information Page Information About Mpls LDP Session Protection Restrictions for Mpls LDP Session ProtectionMpls LDP Session Protection Customizations Enabling Mpls LDP Session Protection How to Configure Mpls LDP Session ProtectionRouterconfig-if#mpls label protocol ldp Verifying Mpls LDP Session Protection Router# show mpls ldp neighbor detail Troubleshooting TipsIp classless Redundancy Full-duplex Interface Ethernet5/0/2 RFCs Title MIBs MIBs LinkCommand Reference Restrictions Mpls LDP Inbound Label Binding FilteringConfiguring Mpls LDP Inbound Label Binding Filtering How to Configure Mpls LDP Inbound Label Binding FilteringIp access-list standard access-list-number Router# show mpls ldp neighbor 10.12.12.12 detail Verifying that Mpls LDP Inbound Label Bindings are FilteredAccess-list-number Access-list-name LDP Specification, draft-ietf-mpls-ldp-08.txt Technical Assistance Description Link Glossary Releases Feature InformationMpls LDP Inbound Label Binding Filtering Page Restrictions for Mpls LDP Autoconfiguration Mpls LDP AutoconfigurationHow to Configure Mpls LDP Autoconfiguration Information About Mpls LDP AutoconfigurationMpls LDP Autoconfiguration on Ospf and IS-IS Interfaces Configuring Mpls LDP Autoconfiguration with Ospf InterfacesGlobally enables hop-by-hop forwarding Router ospf process-id Verifying Mpls LDP Autoconfiguration with Ospf Router# show mpls interfaces Serial 2/0 detail Command or Action Purpose Step Configuring Mpls LDP Autoconfiguration with IS-IS InterfacesEnables IS-IS for IP on the interface Enables the LDP for interfaces that belong to an IS-IS Router# show isis mpls ldp Verifying Mpls LDP Autoconfiguration with IS-ISTroubleshooting Tips Mpls LDP Autoconfiguration with Ospf ExampleCommand Reference Mpls LDP Autoconfiguration with IS-IS ExamplesFeature Information for Mpls LDP Autoconfiguration Feature Information for Mpls LDP Autoconfiguration Mpls LDP Graceful Restart How Mpls LDP Graceful Restart Works Information About Mpls LDP Graceful RestartConfiguring Mpls LDP Graceful Restart How to Configure Mpls LDP Graceful RestartMpls ip Mpls label protocol ldptdpboth Verifying the Configuration Configuration Example for Mpls LDP Graceful RestartRouter 2 configured with LDP SSO/NSF Router 1 configured with LDP GRMpls label protocol ldp mpls traffic-eng tunnels mpls ip Router 3 configured with LDP SSO/NSFMpls Label Distribution Protocol Feature Information for Mpls LDP Graceful Restart Feature Information for Mpls LDP Graceful Restart

12.4 specifications

Cisco Systems has consistently been at the forefront of networking technology, and one of its notable software releases is IOS version 12.4. This version introduced significant enhancements and features that continue to influence networking practices. IOS 12.4 was specifically designed to accommodate the growing demands of network reliability, scalability, and advanced functionalities.

One of the primary characteristics of IOS 12.4 is its enhanced security features. The version integrates advanced security protocols, including improvements in IPsec, which allows for secure communication across potentially insecure networks. Additionally, it supports firewall technologies and access control lists (ACLs), ensuring that organizations can implement stringent security measures tailored to their traffic requirements.

Another defining feature of IOS 12.4 is its support for IPv6. As the internet continued to grow, the need for expanded address space became critical. With IOS 12.4, Cisco provided robust capabilities for transitioning from IPv4 to IPv6, ensuring that network managers could adopt the newer standard without sacrificing performance or reliability. This included support for routing protocols and other networking functions that were essential in an IPv6 environment.

Performance improvements were also a key aspect of IOS 12.4. The release optimized routing protocols, including Enhanced Interior Gateway Routing Protocol (EIGRP) and Open Shortest Path First (OSPF), to enhance convergence times and reduce latency. This effectively contributed to improved network efficiency and uptime.

Cisco also included advanced Quality of Service (QoS) capabilities in IOS 12.4, allowing organizations to prioritize critical traffic. Features such as class-based weighted fair queuing and low-latency queuing became invaluable for organizations requiring seamless voice and video communications over IP networks. This focus on QoS demonstrated Cisco's understanding of the growing importance of multimedia applications in modern business environments.

With a set of stable and scalable routing features, IOS 12.4 supports a variety of platforms, enabling businesses to deploy it across different networking hardware to suit their needs. The modularity of this IOS version makes it flexible for various applications, from small business networks to large enterprise systems.

In summary, Cisco Systems' IOS 12.4 brought forth a wealth of features aimed at enhancing security, performance, and flexibility. Through improved routing capabilities, strong IPv6 support, and advanced QoS features, this version laid the foundation for many of the networking principles that organizations still utilize today.
Top Page Image Contents