English
Dansk | Deutsch | Español | Français | Italiano | Nederlands | Svenska |
SETUP
Figure 5
Connection to a Bose link amplifier, as an example
For the receiver
1.Connect one end of the second Bose® link A cable to the jack labeled Bose® link OUTPUT on the receiver.
2.Connect the other end of the cable to the Bose link Input jack on the expansion room system, amplifier, or powered speaker (Figure 5).
AC Power
Status
LED
|
| Receiver | LIFESTYLE® | Bose link |
Bose | ® | link | RoomMate® speaker | Input jack |
|
|
OUTPUT
Bose link A
cable
Connecting to power
1.Insert the small plug on the power pack cable into the AC Power jack on the transmitter or receiver (Figure 6).
2.Insert the small connector end of the power cord into the jack on power pack. Plug the other end of the cord into an AC (mains) wall outlet. The Status LED lights to verify this power connection.
Figure 6
Connecting the power pack and cord
Receiver |
| AC (mains) |
|
| power outlet |
Power cable | Power pack | Power cord |
|
|
Note: For information on the meaning of the different Status LED lights, refer to “Check the indicators and settings” on page 9.
7