Setup & Use
9Place remote control receiver where you will see or hear it.
10Unwrap and fully extend AC adaptor cord for best reception. Insert AC adaptor jack into remote control receiver socket and plug into wall outlet.
Note: To use a 9V alkaline battery for power source, refer to “Remote Control Receiver Battery Installation” instructions on page 4.
11 Rotate remote control receiver power/volume dial to turn power on. Power indicator lights. Rotate power/volume dial to adjust volume.
Note: AC adaptor is 120 VAC, 60Hz, 3W input; 6 VDC 100mA output; center positive polarity; plug OD is 5.5 mm, plug ID is 1.5 mm.
9