Abit IL-90MV manual Power Management Setup

3.5 Power Management Setup

Phoenix – AwardBIOS CMOS Setup Utility

Power Management Setup

ACPI Suspend Type	S3(Suspend To RAM)	Item Help
- Resume by USB From S3	Enabled
Power Button Function	Instant-Off
CPU THRM-Throttling	50.0%
Wake Up by PME# of PCI	Disabled
Wake Up by WAKE# of PCIe	Disabled
Wake Up by Onboard LAN	Disabled
Wake Up by Onboard 1394	Disabled
Wake Up by Alarm	Disabled
X - Date(of month) Alarm	0
X - Time(hh:mm:ss) Alarm	0 : 0 : 0
Power On Function	Button Only
X - KB Power On Password	Enter
X - Hot Key Power On	Ctrl-F1
Restore On AC Power Loss	Power Off
￿￿￿￿:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit		F1:General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

ACPI Suspend Type

This item selects the type of Suspend mode.

[S1(PowerOn Suspend)]: Enables the Power On Suspend function.

[S3(Suspend To RAM)]: Enables the Suspend to RAM function.

-Resume by USB From S3

When set to [Enabled], this item allows you to use a USB device to wake up a system that is in the S3 (STR - Suspend To RAM) state. This item can be configured only if the item “ACPI Suspend Type” is set to [S3(STR)].

Power Button Function

This item selects the method of powering off your system:

[Delay 4 Sec.]: Pushing the power button for more than 4 seconds will power off the system. This will prevent the system from powering off in case you accidentally hit or pushed the power button.

[Instant-Off]: Pressing and then releasing the power button at once will immediately power off the system.

Wake Up by PME# of PCI

When set to [Enabled], access through the add-on PCI card can remotely wake up the system that was in Soft-Off condition. The PCI card must support the wake up function.

BIOS Setup

iL-90MV 3-17