Abit IL-90MV manual Click Enter key to enter its submenu

IDE Channel 1 Master/Slave, IDE Channel 2 Master/Slave, IDE Channel 3 Master/Slave, IDE Channel 4 Master/Slave

Click <Enter> key to enter its submenu:

Phoenix – AwardBIOS CMOS Setup Utility

IDE Channel 1 Master

IDE HDD Auto-Detection	Press Enter			Item Help
IDE Channel 1 Master	Auto
Access Mode	Auto
Capacity	0	MB
Cylinder	0
Head	0
Precomp	0
Landing Zone	0
Sector	0
￿￿￿￿:Move Enter:Select	+/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values	F6: Fail-Safe Defaults		F7: Optimized Defaults

※The items “IDE Channel 3 Master/Slave” and “IDE Channel 4 Master/Slave” appear only when the item “On-Chip SATA Controller” in the “On-Chip IDE Device” menu is set to [Enhanced Mode].

IDE HDD Auto-Detection

This item allows you to detect the parameters of IDE drives by pressing <Enter> key. The parameters will be shown on the screen automatically.

IDE Channel 1 Master/Slave, IDE Channel 2 Master/Slave, Extended IDE Drive

When set to [Auto], the BIOS will automatically check what kind of IDE drive you are using. If you want to define your own drive by yourself, set it to [Manual] and make sure you fully understand the meaning of the parameters. Please refer to the instruction manual provided by the device’s manufacturer to get the setting right.

Access Mode

This item selects the mode to access your IDE devices. Leave this item to its default [Auto] setting to detect the access mode of your HDD automatically.

Capacity

This item displays the approximate capacity of the disk drive. Usually the size is slightly greater than the size of a formatted disk given by a disk-checking program.

BIOS Setup

iL-90MV 3-3