Abit IL-90MV manual Hardware Setup

7.Carefully place the heatsink onto CPU socket in the direction of blowing its airflow toward rear panel.

Use a cross-head screw driver to lock the four screws around the heatsink.

8.Lock the screws diagonally in the order of (1) ￿ (2) ￿ (3) ￿ (4).

Turn the screw halfway down the screw hole. Do not over-tighten the screw all the way down into the screw hole one at a time. Avoid CPU damage caused by unbalanced forcing.

9.Plug the fan power connector from the CPU cooler to the “CPUFAN1” connector on this motherboard.

Now complete the CPU and heatsink installation.

※The installation procedures vary with different types of CPU fan-and-heatsink assembly. The one shown here is served for DEMO only. For detailed information on how to install the one you bought, refer to its installation guidelines.

※A higher fan speed will be helpful for better airflow and heat-dissipation. Nevertheless, stay alert to touch any heatsink since the high temperature generated by the working system is still possible.

Hardware Setup

iL-90MV 2-11