Abit IL-90MV manual Serial ATA Connectors

2.6.2 Serial ATA Connectors

Each SATA connector serves as one single channel to connect one SATA device by a thin SATA cable.

For more information on how to configure the function mode for SATA, please refer to the item “On-Chip SATA Controller” in the BIOS menu of “On-Chip IDE Device”.

To connect SATA device:

1.Attach either end of the signal cable to the SATA connector on motherboard. Attach the other end to SATA device.

2.Attach the SATA power cable to the SATA device and connect the other end from the power supply.

2-14 iL-90MV