BIOS Setup
iL-90MV 3-13
IDE Bus Master
This option enables or disables the IDE bus mastering capability under the DOS environment.
On-Chip IDE-1 Controller
This item selects whether to enable or disable the IDE-1 controller.
On-Chip SATA Mode
This item determines the mode for on-chip Serial ATA.
[IDE]: The on-chip Serial ATA served as IDE mode.
[RAID]: The on-chip Serial ATA served as RAID mode.
[AHCI]: The on-chip Serial ATA served as AHCI (Advanced Host Controller Interface) mode for
advanced performance and usability.
※ In the “Intel Matrix Storage Manager Option ROM” utility for the [RAID] mode
configuration, the physical disk “Port Ø” indicates connector “SATA1”, whereas
“Port 2” indicates connector “SATA2”.
※ The [RAID] option is only available when the item “On-Chip SATA Controller” is
set to [Enhanced Mode].
- SATA RAID ROM
This item allows you to use the boot ROM of on-chip Serial ATA RAID to boot up system.
On-Chip SATA Controller
This item determines the function for on-chip Serial ATA.
[Disabled]: Disable the Serial ATA controller.
[Auto]: Allows the Serial ATA controller to be arranged by BIOS automatically.
[Combined Mode]: Parallel ATA and Serial ATA are combined together. Supports up to 4 IDE
drives.
[Enhanced Mode]: Enable both Parallel ATA and Serial ATA. Supports up to 4 IDE drives.
[SATA Only]: The SATA is operating in legacy mode.
※ This option is configurable only when the item [On-Chip SATA Mode] is set to
[IDE].
Mode IDE Channel
1 Master
IDE Channel
1 Slave
IDE Channel
2 Master
IDE Channel
2 Slave
IDE Channel
3 Master
IDE Channel
3 Slave
Enhanced IDE Master IDE Slave None None SATA1 SATA2
Combined *1 IDE Master IDE Slave None None None None
Combined *2 SATA1 SATA2 IDE Master IDE Slave None None
SATA Only SATA1 SATA2 None None None None
*1: When [PATA IDE Mode] functions as IDE-1.
*2: When [PATA IDE Mode] functions as IDE-2.