Paper Thickness Setup Ready | Fujitsu C150-E141-02EN specification

1.In <<SETUP MODE>> initial screen, press

ENTER .

The <<SETUP MODE>> menu screen (Settings or Paper Length Check) appears.

NOTE

The “Settings” screen does not appear and the “Paper Length Check” screen first appears when your scanner is not controlled through the video or TP interface.

2.Press twice.

The <<SETUP MODE>> menu screen (Paper Thickness Setup) appears.

3.Press ENTER .

The paper load prompting screen appears, requesting adjustment paper.

4.Select thickest paper used for your jobs and put the paper on the hopper.

5.Press ENTER .

The “Adjusting!!” message appears. The scanner lifts the hopper, feeds the paper, adjusts the sensing level of the sensor, and saves its value.

After adjustment, the sheet is ejected and the “Finished!!” message appears for two seconds, then the LCD returns to the <<SETUP MODE>> menu screen (Paper Thickness Setup).

If an error (for example, Mis-pick) occurs during adjustment, remove the paper and press CANCEL . The paper load prompting screen appears again. Repeat steps 4 and 5.

6.Press CANCEL two times.

The LCD returns to the Ready screen.

<<SETUP MODE>>

<<SETUP MODE>>

Settings

<<SETUP MODE>> Paper Length Check

<<SETUP MODE>>

Paper Thickness Setup

Paper Thickness Setup Set the adjustment paper

Paper Thickness Setup

Adjusting!!

Paper Thickness Setup

Finished!!

<<SETUP MODE>>

Paper Thickness Setup

Ready

6-12

Image 57

Fujitsu C150-E141-02EN manual Paper Thickness Setup Ready

Contents

M4099D Image Scanner M4099D Image Scanner Page Fujitsu Computer Products AMERICA, INC Important Note to Users Preface TIONS, Operating INSTRUCTION, Document Specification Conventions Contents Components Components Checking the Components Units Units and Assemblies Name Function Assemblies Arrangement Operator Panel LCD Display Button/LED Function Operation status display Sound condition Function Buzzer Installation and Connections Achtung Precautions Inspection Label C An example Turning the main line switch off Connecting the power cableCable Connection Connecting the interface cable Operating Instruction Turning the Power On Basic Operation of the Operator Panel Displaying detailed information if an error occurred Lifting or lowering the hopper Clearing a consumable life alarm Value Meaning Description Confirming the number of sheets processed by the scanner Using the function buttons F1, F2, and F3 Using the setup, browse, and test modes Turn off to quit Mode Select Blinking Occurred Transition of operator panel status and display Documentspecification Scanner Maximum Minimum M4099D Document Size Ream weight of paper Document QualityPaper types of documents Precautions Page Specifications Specification Installation Specifications External Dimensions Consumables Name Specification Service life and remarks Options SETUP, BROWSE, and Test Modes Setup, Browse, and Test Modes Functions not available in setup modeFunctions not available in browse mode Activating the Setup or Browse Mode Button functions in setup or browse modeReady Mode selection Menu pressed in Ready status Contents of the Setup or Browse Mode Scsi ID Setup mode menu screen Transition of screens in setup mode Paper size/orientation Settings Settings A4P AT2 200 LA 200400 A4P AT2 400 LA Paper length check Settings Setup Mode Paper Length CheckLength Check 10 mm Paper thickness check Paper Length Check Setup Mode Paper Length Check Ready Paper thickness setup Paper Thickness Check Check OFF Check onPaper Thickness Check Ready Paper Thickness Setup Ready Skew check Skew Check Check OFF Check onSkew Check Ready IPC-3 Mode IPC-3 mode Paper types and corresponding pattern numbers Reading parameter validity Hopper height Hopper Height Sheets Paper separation level Set braking power according to the table below Paper Separation Level Ready Paper Separation Level Normal Medium Thin Drop-out Color Front Green Back Green Drop-out color Drop-out Color Ready Drop-out Color Front Green Back Red Consumable counter Setup Mode Consumable Counter Buzzer Buzzer Ready Buzzer Buzzer Volume Min n n q q q q Max Buzzer volume Buzzer Volume Min n n n q q q Max Buzzer Volume ReadyLCD contrast LCD Contrast Ready Picking speed Picking Speed Ready Picking Speed Fast Slow Interface Interface Tpif baud rate Video Setup Mode RS232C baud rate Tpif Baud Rate 9600 19200Tpif Baud Rate Setup Mode Scsi ID Product ID Pre-pick Product ID M4099D M3099GProduct ID Pre-pick Ready Pre-pick Pick start time Pick start time 01.0 S 05.0 SPick start time Setup Mode Manual Feed Timeout 30 S Manual feed timeout Paper pick retry Paper Pick retry Ready Paper Pick retry Step Times Paper Feed retry Times Paper feed retry Paper Feed retry Step Times Paper Feed retryPaper Feed retry Ready Function key Setup Mode Setup Mode Lock Setup mode lock OFF Button functions in test mode Activating the Test ModeTest Mode Offline Feed Test Please wait Mode selection power on with Menu pressed Contents of the Test Mode Offline feed test Test Mode Offline Feed Test A4P AT2 200 LA Feeding 123456781234 LTP AT2 200 LA Options Offline Feed TestOptions Endorser IPC-3D Device Life Device lifeLamp F 12345678 Browse mode Automatic start mode manual start modeA4 size Automatic separation Equipment Error Duplex reading modeError diffusion Dither Halftone processing Front-side reading = Front-side scanningHexadecimal Image emphasis Manual Feed mode = Manual Mode Linedrawing modeLandscape Letter size Photo mode = photograph mode Paper Jam Photograph mode White level follower OFFPicking start time Picking time Simplex reading mode Setup modeStart command time-out Temporary Error Terminator Test mode Index LED Scsi ID Page