Fujitsu C150-E141-02EN Paper separation level, Set braking power according to the table below

5. Press CANCEL three times.	Ready
The LCD returns to the Ready screen.

After this setting, the hopper is set at the new height whenever power is turned on.

Paper separation level

This function sets the power of the brake roller for stabilizing paper separation in picking documents.

LCD display	Options	Remarks
Paper Separation Level	Thick, Medium Thick, Normal, Medium Thin,	Thick: strong braking power for thick paper
	Thin (Default: Normal)		(changes according to paper thickness)
		Thin:	weak braking power for thin paper

If the following errors frequently occur, set the braking power as explained below.

•Double feed

•Mis-pick

•SF2 did not detect leading edge of paper

Set “braking power” according to the table below.

Setting	Braking power	“Double feed” frequently occurs.
Thick	Strong
Medium	Less strong
Thick
		Make the braking
Normal	Medium
	(factory default)	power stronger.
Medium	Less weak
Thin

“Mis-pick” or “SF2 ···” frequently occurs.

Make the braking power weaker.

Thin

Weak

6-18