Fujitsu C150-E141-02EN manual Offline feed test, Test Mode Offline Feed Test A4P AT2 200 LA

Offline feed test

This function scans sheets of paper continuously for checking entire operation of the mechanism without a host computer. You can use the Settings function in setup mode to modify scanning parameters (scanning mode, paper size/orientation, density, resolution, and halftone processing) for scanning documents.

LCD display	Test items	Remarks
Offline Feed Test	START and SETUP	START: begins the test.
		SETUP: changes settings of scanning
		parameters.

* For SETUP operation, see the “Settings” function previously described in this chapter.

The following is an example of operation when you start the offline feed test after setting scanning parameters.

1.Put sheets of paper on the hopper table.

2.In the <<TEST MODE>> initial screen, press

ENTER .

The <<TEST MODE>> menu screen (Offline Feed Test) appears.

3.Press ENTER again.

The scanning parameters screen indicates the current parameters with START blinking (blinking indicates “selectable”).

4.Press .

SETUP blinks (blinking indicates “selectable”).

5.Press ENTER .

The LCD changes to the parameter set screen with S (simplex mode) blinking (blinking indicates “selectable”).

6.Press .

A4P (A4 size in portrait orientation) blinks (blinking indicates “selectable”).

<<TEST MODE>>

<<TEST MODE>> Offline Feed Test

S A4P AT2 200 LA

START SETUP

S A4P AT2 200 LA

START SETUP

S A4P AT2 200 LA

AT2 LA

S A4P AT2 200 LA

AT2 LA

6-50