2.Press 
.
The <<SETUP MODE>> menu screen (Paper Thickness Check) appears.
3.Press ENTER .
The option select screen appears with the current option OFF blinking (blinking indicates “changeable”).
4.Press 
or 
.
The displayed option changes (ON blinks).
5. Press ENTER to save the change.
The LCD returns to the <<SETUP MODE>> menu screen (Paper Thickness Check).
6.Press CANCEL two times.
The LCD returns to the Ready screen.
<<SETUP MODE>>
Paper Thickness Check
Paper Thickness Check
Check: OFF
Paper Thickness Check
Check: ON
<<SETUP MODE>>
Paper Thickness Check
Ready
Paper thickness setup
This function sets the paper thickness which is used as the reference for detecting a double feed error. Whether this function is enabled or disabled is determined by the “paper thickness check” function in setup mode.
NOTE
This setting cannot be displayed in browse mode.
The following is an example of operation when you use this function.
