The following is an example of operation when you use this function.
1.In <<SETUP MODE>> initial screen, press
ENTER .
The <<SETUP MODE>> menu screen (Settings or Paper Length Check) appears.
NOTE
The “Settings” screen does not appear and the “Paper Length Check” screen first ap- pears when your scanner is not controlled through the video or TP interface.
2.Press 
repeatedly until “Paper Separation Level” appears in the lower line of the menu screen.
3.Press ENTER .
The option select screen appears with the current option Normal blinking (blinking indicates “changeable”).
4.Press 
or 
.
The displayed option changes (Thick to Thin).
5.When the desired option appears, press
ENTER to save the change.
The LCD returns to the <<SETUP MODE>> menu screen (Paper Separation Level).
6.Press CANCEL two times.
The LCD returns to the Ready screen.
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>> Paper Length Check
<<SETUP MODE>>
Paper Separation Level
Paper Separation Level
Normal
Paper Separation Level
Medium Thin
<<SETUP MODE>>
Paper Separation Level
Ready
