Fujitsu C150-E141-02EN manual Product ID

5.When the desired value appears, press

ENTER to save the change.

The LCD returns to the <<SETUP MODE>> menu screen (SCSI ID).

6.To quit the <<SETUP MODE>>, turn off the power.

Product ID

<<SETUP MODE>>

SCSI ID

This function sets the product ID of the scanner. Usually, you need not change this setting.

NOTE

You cannot use this function when the setup mode is brought by pressing MENU in the Ready status.

LCD display

Options

Remarks

Product ID

M4099D, M3099G (Default: M4099D)

Model number of this scanner

* The model number of this scanner is M4099D.

The following is an example of operation when you use this function.

1.In <<SETUP MODE>> initial screen, press

ENTER .

The <<SETUP MODE>> menu screen (Settings or Paper Length Check) appears.

NOTE

The “Settings” screen does not appear and the “Paper Length Check” screen first ap- pears when your scanner is not controlled through the video or TP interface.

<<SETUP MODE>>

<<SETUP MODE>>

Settings

<<SETUP MODE>> Paper Length Check

6-34