RS-232C interface
A type of serial interface. See Serial interface.
SCSI-ID
Used to specify a particular SCSI device when the initiator selects a target or the target
Serial interface
A standard computer interface. Information is transferred between devices over a single wire (although other wires are used for control).
With a serial interface, an interface cable greater than 3 meters (10 feet) can be used. This is often necessary in networking environments, where the scanner may be shared.
Setup mode
In this mode, users can set a variety of functions in offline status for customizing the scanner for user requirements.
SF1 sensor
The document detection sensor. It detects the light that transmits the paper. It also detects the double feed error.
Simplex reading mode
Only the front side of the document is read in this mode. Place the documents
Smoothing
Smoothing eliminates jaggies from slanted lines and curves. Irregular convexities are deleted and irregular concavities filled in. This is useful in OCR applications, for example.
Start command time-out
Occurs if START command does not arrive before the specified time after reading the previous document is complete. In this case the hopper table is lowered.
Temporary Error
An error that is recoverable by operator.
