Buzzer volume
This function sets the sound volume of the buzzer in six steps.
NOTE
This setting is valid both for occurrence of an error and for press of an operator panel button.
LCD display | Options |
| Remarks |
|
|
|
|
|
|
|
|
|
|
|
Buzzer Volume | n q q q q q |
| Minimum |
|
| to | (Default: n n q q q q) | to | (six steps) |
| n n n n n n |
| Maximum |
|
|
|
|
|
|
* Symbols of volume may differ from the actual symbols used in the LCD.
The following is an example of operation when you use this function.
1.In <<SETUP MODE>> initial screen, press
ENTER .
The <<SETUP MODE>> menu screen (Settings or Paper Length Check) appears.
NOTE
The “Settings” screen does not appear and the “Paper Length Check” screen first ap- pears when your scanner is not controlled through the video or TP interface.
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>> Paper Length Check
2.Press 
repeatedly until “Buzzer Volume” appears in the lower line of the menu screen.
3.Press ENTER .
The option select screen appears with the current setting n n q q q q (no blinking but changeable).
<<SETUP MODE>>
Buzzer Volume
Buzzer Volume
Min n n q q q q Max
