Interface
This function sets the host interface.
NOTE
You cannot use this function when the setup mode is brought by pressing MENU in the Ready status.
LCD display | Options | Remarks |
|
|
|
|
|
|
Interface | Auto, SCSI, Video, TP_IF (Default: Auto) | Auto: The scanner automatically detects the |
|
| interface through which a host |
|
| computer issues a command. |
|
| TP_IF: Third party’s interface |
|
|
|
The following is an example of operation when you use this function.
1.In <<SETUP MODE>> initial screen, press
ENTER .
The <<SETUP MODE>> menu screen (Settings or Paper Length Check) appears.
NOTE
The “Settings” screen does not appear and the “Paper Length Check” screen first ap- pears when your scanner is not controlled through the video or TP interface.
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>> Paper Length Check
2.Press 
repeatedly until “Interface” ap- pears in the lower line of the menu screen.
3.Press ENTER .
The option select screen appears with the current setting AUTO blinking (blinking indicates “changeable”).
<<SETUP MODE>>
Interface
Interface
AUTO
