Fujitsu C150-E141-02EN manual RS232C baud rate, Tpif Baud Rate 9600 19200

2.Press repeatedly until “TP_IF Baud Rate” appears in the lower line of the menu screen.

3.Press ENTER .

The option select screen appears with the current setting 9600 blinking (blinking indicates “change- able”).

4.Press or .

The displayed option changes (19200, 2400, 4800 ).

5. When the desired option appears, press ENTER to save the change.

The LCD returns to the <<SETUP MODE>> menu screen (TP_IF Baud Rate).

6.To quit the <<SETUP MODE>>, turn off the power.

RS232C baud rate

<<SETUP MODE>>

TP_IF Baud Rate

TP_IF Baud Rate

9600

TP_IF Baud Rate

19200

<<SETUP MODE>>

TP_IF Baud Rate

This function sets the baud rate (signaling speed) according to the baud rate of the RS-232C inter- face. At least, set the speed slower than that of the host interface.

NOTE

You cannot use this function when the setup mode is brought by pressing MENU in the Ready status.

LCD display

Options

Remarks

RS232C Baud Rate

2400, 4800, 9600, 19200 (Default: 4800)

Unit: baud

The following is an example of operation when you use this function.

6-31