Fujitsu C150-E141-02EN manual Settings Setup Mode Paper Length Check, Hopper Height Sheets

The following is an example of operation when you use this function.

1.In <<SETUP MODE>> initial screen, press

ENTER .

The <<SETUP MODE>> menu screen (Settings or Paper Length Check) appears.

NOTE

The “Settings” screen does not appear and the “Paper Length Check” screen first appears when your scanner is not controlled through the video or TP interface.

<<SETUP MODE>>

<<SETUP MODE>>

Settings

<<SETUP MODE>> Paper Length Check

2.Press repeatedly until “Hopper Height” appears in the lower line of the menu screen.

3.Press ENTER .

The option select screen appears with the current height setting 1000 sheets blinking (blinking indicates “changeable”).

4.Press .

The hopper moves to the 500-sheet position and the new height setting 500 sheets blinks.

NOTE

Each time you press or , the hopper moves to the next position and its position is automatically saved. Repeat this operation until the hopper is positioned at the desired height.

If an error occurs during positioning, press CANCEL . The LCD returns to the option select screen. Repeat step 4.

<<SETUP MODE>>

Hopper Height

Hopper Height

1000 sheets

Hopper Height

500 sheets

6-17