Fujitsu C150-E141-02EN manual LCD contrast, Buzzer Volume Min n n n q q q Max, Buzzer Volume Ready

4.Press or .

The displayed option changes (n n n q q q to n n n n n n or n q q q q q).

5.When the desired option appears, press

ENTER to save the change.

The LCD returns to the <<SETUP MODE>> menu screen (Buzzer Volume).

6.Press CANCEL two times.

The LCD returns to the Ready screen.

Buzzer Volume

Min n n n q q q Max

<<SETUP MODE>>

Buzzer Volume

Ready

LCD contrast

This function sets the contrast of the LCD on the operator panel in six steps.

LCD display	Options		Remarks
LCD Contrast	n q q q q q		Dark (low contrast)
	to	(Default: n n q q q q)	to	(six steps)
	n n n n n n		Bright (high contrast)

* Symbols of volume may differ from the actual symbols used in the LCD.

The following is an example of operation when you use this function.

1.In <<SETUP MODE>> initial screen, press

ENTER .

The <<SETUP MODE>> menu screen (Settings or Paper Length Check) appears.

NOTE

The “Settings” screen does not appear and the “Paper Length Check” screen first ap- pears when your scanner is not controlled through the video or TP interface.

<<SETUP MODE>>

<<SETUP MODE>>

Settings

<<SETUP MODE>> Paper Length Check

6-26