Fujitsu C150-E141-02EN manual Tpif baud rate, Video Setup Mode

4.Press or .

The displayed option changes (SCSI, VIDEO, TP_IF ).

5.When the desired interface appears, press

ENTER to save the change.

The LCD returns to the <<SETUP MODE>> menu screen (Interface).

6.To quit the <<SETUP MODE>>, turn off the power.

TP_IF baud rate

Interface

VIDEO

<<SETUP MODE>>

Interface

This function sets the baud rate (signaling speed) according to the baud rate of the third party inter- face (TP_IF). At least, set the speed slower than that of the host interface.

NOTE

You cannot use this function when the setup mode is brought by pressing MENU in the Ready status.

LCD display

Options

Remarks

TP_IF Baud Rate

2400, 4800, 9600, 19200 (Default: 9600)

Unit: baud

The following is an example of operation when you use this function.

1.In <<SETUP MODE>> initial screen, press

ENTER .

The <<SETUP MODE>> menu screen (Settings or Paper Length Check) appears.

NOTE

The “Settings” screen does not appear and the “Paper Length Check” screen first ap- pears when your scanner is not controlled through the video or TP interface.

<<SETUP MODE>>

<<SETUP MODE>>

Settings

<<SETUP MODE>> Paper Length Check

6-30