1.In <<SETUP MODE>> initial screen, press
ENTER .
The <<SETUP MODE>> menu screen (Settings or Paper Length Check) appears.
NOTE
The “Settings” screen does not appear and the “Paper Length Check” screen first ap- pears when your scanner is not controlled through the video or TP interface.
2.Press 
repeatedly until “Paper Pick retry” appears in the lower line of the menu screen.
3.Press ENTER .
The option select screen appears with the current setting 2 (for Step) blinking (blinking indicates “changeable”).
4.Press 
.
The current count setting 4 blinks.
5.Press 
or 
.
The displayed option changes (1, 2, 3, 4, 5, 6, 7).
6.When the desired value appears, press
ENTER to save the change.
The LCD returns to the <<SETUP MODE>> menu screen (Paper Pick retry).
7.Press CANCEL two times.
The LCD returns to the Ready screen.
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>> Paper Length Check
<<SETUP MODE>>
Paper Pick retry
Paper Pick retry
Step: | 2 | Times: 4 | |||
Paper Pick retry | |||||
Step: 2 | Times: | 4 |
| ||
Paper Pick retry |
|
| |||
Step: 2 | Times: | 7 |
| ||
<<SETUP MODE>>
Paper Pick retry
Ready
