Paper length check
This function sets and detects a difference in paper length. You cannot change settings if they are set by the host computer.
| LCD display | Options | Remarks |
|
|
|
|
|
|
|
|
| Paper Length Check | On, Off (Default: Off) | Checked or not |
|
| 10 mm, 15 mm, 20 mm (Default: 10 mm) | Difference: |
|
|
| XX mm means that it is not regarded as an |
|
|
| error when the actual difference of paper length |
|
|
| is within the limits of ±XX mm. |
|
|
|
|
The following is an example of operation when you use this function.
1.In <<SETUP MODE>> initial screen, press
ENTER .
The <<SETUP MODE>> menu screen (Settings) appears.
NOTE
The “Settings” screen does not appear and the “Paper Length Check” screen first ap- pears when your scanner is not controlled through the video or TP interface.
2.When the menu screen indicates “Settings”,
press 
.
The <<SETUP MODE>> menu screen (Paper Length Check) appears.
3.Press ENTER .
The option select screen indicates the current options with ON blinking (blinking indicates “changeable”).
<<SETUP MODE>>
<<SETUP MODE>>
Settings
<<SETUP MODE>> Paper Length Check
Paper | Length Check | |
| ON | 10 mm |
