Graham Field 14423-2 Recommended separation distances, Rated Separation distance according to

Page 38

Info 1: At 80 MHz and 800 MHz, the higher frequency range applies.

Info 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.

a:Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the Grafco Ultrasound Pocket Doppler is used exceeds the applicable RF compliance level above, the Grafco Ultrasound Pocket Doppler should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as reorienting or relocating the Grafco Ultrasound Pocket Doppler.

b:Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.

recommended separation distances

recommended separation distances between portable and mobile rf communications equipment and the grafco ultrasound pocket doppler

The Grafco Ultrasound Pocket Doppler is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the device can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the Grafco Ultrasound Pocket Doppler as recommended below, according to the maximum output power of the communications equipment.

rated

separation distance according to

maximum

frequency of transmitter (m)

output power

 

 

80 mhz to 800 mhz

800 mhz to 2.5 ghz

of transmitter

 

 

(W)

 

 

 

 

 

0.01

0.1167

0.2334

 

 

 

0.1

0.3689

0.7378

 

 

 

1

1.1667

2.3334

10

3.6893

7.3786

 

 

 

100

11.6667

23.3334

14423-INS-LAB-RevE1338

Image 38
Contents INS-LAB-RevE13 Contents Intended use of thIs devICe InCluded featuresIntroduCtIon OptIonal aCCessorIes Product descriptionSafety guidance Safety InformatIonSafety preCautIons INS-LAB-RevE13 INS-LAB-RevE13 INS-LAB-RevE13 Symbols UnpaCkIng HandlIngGf health produCts, InC. freIght polICy Storage InspectionUltrasound poCket doppler and aCCessorIes AppearanCe and featuresSocket Jack Definition PowerButton Probe frame Feature Function BatteryRear panel Socket Name Picture FeatureTop panel Left panel Feature Function Volume ControlMode button Start/stop button ReC/play buttonBattery PoCket doppler Waterproof probesSetup InstallIng or replaCIng the batteryINS-LAB-RevE13 Removing the probe from the pocket doppler OperatIonProbe operatIon Placing the probe in the pocket dopplerTurnIng on the poCket doppler Swapping probesFetal heart fh monItorIng Fh monitoring with 2.0 mhz Waterproof probeVasCular monItorIng WIth 4.0 or 8.0 mhz probe optIonal ReplaCIng the battery TurnIng off the poCket dopplerMaIntenanCe and CleanIng MaIntenanCeCleanIng Cleaning the pocket dopplerCleaning the pocket doppler probe DIsInfeCtIon Disinfecting the pocket doppler probeSpeCIfICatIons SafetyFhr Power BatteryPhysical Ultrasound LImIted Warranty INS-LAB-RevE13 GF Health Products, Inc. Graham-Field AppendIx a, eC deClaratIon of ConformIty EC declaration of ConformityAppendIx b, emC InformatIon GuIdanCe and manufaCturer’s deClaratIonDistance RF IECFrequency of transmitter m Recommended separation distancesRated Separation distance according to INS-LAB-RevE13 AppendIx C, overall sensItIvIty Overall sensitivity 2 mhz probe=Ad+B+C Index INS-LAB-RevE13
Related manuals
Manual 44 pages 62.72 Kb