Graham Field 14423-2 manual INS-LAB-RevE13

Page 6

WarnIngs

WARNING: Federal Law (USA) restricts this device to sale by or on the order of a physician. This product should not be used unless the operator has been instructed by a qualified healthcare professional.

WARNING: Do not use the Grafco Pocket Doppler in a flammable atmosphere where concentrations of flammable anesthetics or other materials may occur.

WARNING: Do not expose batteries to heat.

WARNING: Do not attempt to charge alkaline batteries; they may leak or catch on fire.

WARNING: DO NOT simultaneously touch signal input or output connector and the patient.

WARNING: Accessory equipment connected to the analog and digital interfaces must be certified according to the respective IEC standards (e.g. IEC 950 for data processing equipment and IEC 60601-1 for medical equipment). Furthermore all configurations shall comply with the valid version of the system standard IEC 60601-1-1. Anyone who connects additional equipment to the signal input connector, or signal output connector, configures a medical system, and is therefore responsible for verifying the system complies with the requirements of the valid version of the system standard

IEC 60601-1-1. If in doubt, consult your GF Health Products, Inc. authorized distributor.

WARNING: The Grafco Pocket Doppler is a tool to aid the healthcare professional and should not be used in place of normal fetal monitoring.

WARNING: Exposure to ultrasound should be kept as low as reasonably achievable. This is considered to be good practice and should be observed at all times.

WARNING: Replace the battery at least 6 feet (1.5 meters) from the patient.

14423-INS-LAB-RevE13

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents INS-LAB-RevE13 Contents InCluded features IntroduCtIon Intended use of thIs devICe OptIonal aCCessorIes Product descriptionSafety InformatIon Safety preCautIonsSafety guidance INS-LAB-RevE13 INS-LAB-RevE13 INS-LAB-RevE13 Symbols HandlIng Gf health produCts, InC. freIght polICyUnpaCkIng Storage InspectionUltrasound poCket doppler and aCCessorIes AppearanCe and featuresPower ButtonSocket Jack Definition Feature Function Battery Rear panelProbe frame Feature Top panelSocket Name Picture Left panel Feature Function Volume ControlMode button Start/stop button ReC/play buttonBattery PoCket doppler Waterproof probesSetup InstallIng or replaCIng the batteryINS-LAB-RevE13 Removing the probe from the pocket doppler OperatIonProbe operatIon Placing the probe in the pocket dopplerTurnIng on the poCket doppler Swapping probesFetal heart fh monItorIng Fh monitoring with 2.0 mhz Waterproof probeVasCular monItorIng WIth 4.0 or 8.0 mhz probe optIonal ReplaCIng the battery TurnIng off the poCket dopplerMaIntenanCe and CleanIng MaIntenanCeCleanIng Cleaning the pocket dopplerCleaning the pocket doppler probe DIsInfeCtIon Disinfecting the pocket doppler probeSpeCIfICatIons SafetyPower Battery PhysicalFhr Ultrasound LImIted Warranty INS-LAB-RevE13 GF Health Products, Inc. Graham-Field AppendIx a, eC deClaratIon of ConformIty EC declaration of ConformityAppendIx b, emC InformatIon GuIdanCe and manufaCturer’s deClaratIonDistance RF IECRecommended separation distances Rated Separation distance according toFrequency of transmitter m INS-LAB-RevE13 AppendIx C, overall sensItIvIty Overall sensitivity 2 mhz probe=Ad+B+C Index INS-LAB-RevE13
Related manuals
Manual 44 pages 62.72 Kb
Top Page Image Contents