Fisher-Price 79652 instruction sheet Rounded Side M6 Lock Nut Frame Lower Hole Base Wire Spring

Page 5

Assembly

5

Frame

•Tighten the screws with a Phillips screwdriver. Do not over-tighten.

•Repeat assembly steps 3 - 5 to attach the other ends of the frame tubes to the frame on the other side of the base.

M6 x 15/8" Screw - 4

Spring - 4

7

•Fit an M6 lock nut (with the rounded side toward the fabric) into each lower, hexag- onal opening on the back

of the frame.

Rounded Side

M6 Lock Nut - 4

Frame

Lower Hole

Base

Wire

Spring

6

Base Wire

•Tighten the screws with a Phillips screwdriver. Do not over-tighten.

•Repeat this procedure to attach the other ends of the base wires to the frame on the other side of the base.

•Position the base wires around the base so that the ends point upward and are against the lower holes in a frame.

•Place a spring onto an M6 x 15/8" screw.

•Insert the M6 x 15/8" screw with spring through a base wire and into the frame.

5

Image 5

Contents Model Number Bounce ‘n Play Activity DomeInformation Pad Toys Toys may Base Wires Plastic Mesh Cover StayParts Assembly Spring Rounded Side M6 Lock Nut Frame Lower Hole Base Wire SpringToys Canopy Fasteners Pad To Unfold Using the CanopyUse Care Frame GrooveGroove Sides of Base WireTo Fold for Portability Zipper