Care and Maintenance

Cover Removal

1Loosen the harness, by lifting the harness release lever while pulling the shoulder straps forward as far as possible.

2Unhook the shoulder straps from the yoke, on the rear of child restraint.

3Pull upper harness straps through the shell and cover, to the front of the restraint.

4Remove the belly pad from the buckle.

5Gently remove the upper portion of the cover. Be careful not to damage the energy absorbing foam.

6Pull the lower harness straps, buckle tongues, chest clip, and buckle through the slots in the cover.

WARNING:

•Do not take apart or attempt to take apart the harness. It is unnecessary and dangerous to do so.

•Never remove the buckle tongues from the harness. They cannot be reattached after removal.

•Never remove the HUGS system from the harness straps. 7 Remove the entire cover from the restraint.

Refitting the Cover

To refit the cover, reverse Cover Removal directions. Make sure that the shoulder straps are threaded through the chest clips and that the harness is not twisted.

Care and Maintenance

Cleaning the Cover

HAND WASH, using cold water and mild soap.

LINE DRY, to prevent cover from shrinking.

DO NOT:

•Bleach

•Machine wash

•Machine dry

Cleaning the Harness

SPONGE CLEAN, using warm water and mild soap.

TOWEL DRY DO NOT:

•Bleach

•Machine wash

•Machine dry

•Disassemble the harness

Cleaning the Shell

SPONGE CLEAN, using warm water and mild soap.

TOWEL DRY

DO NOT:

•Use abrasive cleaners

•Disassemble the harness