Britax Britix Marathon manual Forward-Facing, Matic locking retractor ALR, use, Your vehicle has

Page 11

Installation: Forward-Facing

Forward-Facing

Lap-Shoulder Belt Installation

•Figure A illustrates the forward-facing lap- shoulder vehicle belt route.

•When not in use, always store the LATCH connectors in storage pouches sewn in cover above rear-facing lock-offs.

1�Place the child restraint forward facing on the vehicle seat..

•Restraint must be in the full upright position when installed in forward-facing mode with children over 33 pounds (15 kg).

•Installation can be improved by the use of the Versa-Tether®(see pages 23–25).

2�Pull the vehicle belt out, then pass it over the LATCH bar, through the forward- facing belt slots, then over the LATCH bar on the other side (Fig. B).

3�Verify that the vehicle belt is not twisted, then buckle (Fig. C)..

4�Locate the lock-off farthest from where the vehicle belt will be buckled Rotate lock-off lever downward to open..

5�Remove slack from the lap portion of the vehicle belt..

A

B

C

Installation: Forward-Facing

6�Push the child restraint into the vehicle

 

seat while pulling the shoulder portion

 

of the vehicle belt tightly through the

 

lock-off (Fig. D)..

 

• If your vehicle is equipped with an auto-

 

matic locking retractor (ALR), use of the

 

lock-offs is not required as long as the ALR

 

is activated. Check your vehicle’s owner’s

 

manual to determine the type of retractor

D

your vehicle has.

7�Hold shoulder belt tight, then rotate the lock-off upward until secured (Fig. E)..

8�Verify that all connections are secure and the restraint is stable. The restraint is stable when it cannot be moved front to back or side to side more than 1 inch (2..5 cm..) at the belt path..

•See "Checking Buckle Position" on

page 26.

E

Removal

Disconnect Versa-Tether®, if attached. Open lock-offs, then unbuckle and remove vehicle belt from belt path.

18

19

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Marathon Table of Contents Page Fill out the registration card and mail it in today Safety InformationHugs Restraint FeaturesVehicle Seating Positions Vehicle Safety Belts23-25 Installation Rear-FacingLevel surface Removal 24, using anchor pointLap-Belt Installation Installation Forward-Facing See Checking Buckle Position on Forward-FacingMatic locking retractor ALR, use Your vehicle hasRemoval Installation Forward-Facing Switching the Latch ConnectorsSwitching the Latch Harness Storing the Latch ConnectorsVersa-Tether Installation in AircraftRear-Facing Installation Forward-Facing InstallationEnergy-Absorbing Tether Using the Versa-TetherRear-Facing Tether Connector Strap See figures B and C for rear-facing installationChecking Buckle Position Recline AdjustmentUsing the Buckle Using the Chest Clip11See Checking Harness Height on Securing Your ChildTo Check Harness Height Adjusting Harness HeightHarness Height Adjustment Checking Harness HeightCare and Maintenance Rethreading the Buckle Cleaning the BuckleThoroughly Rinse using Buckle RemovalLimited ONE-YEAR Warranty Warranty

Britix Marathon specifications

The Britax Britix Marathon is a leading convertible car seat designed for parents who prioritize safety, comfort, and usability. This innovative car seat caters to children ranging from 5 to 65 pounds, accommodating infants, toddlers, and preschoolers alike. The Marathon is engineered with a focus on security, featuring advanced safety technologies that set it apart in the crowded market of child restraint systems.

One of the cornerstone safety features of the Britix Marathon is its SafeCell Impact Protection system. This technology includes a base that compresses during a collision, effectively lowering the center of gravity and reducing the risk of seat rotation, which in turn minimizes the force of impact on the child. The car seat also comes equipped with a steel frame that adds an extra layer of strength and stability, reinforcing the overall safety of the seat during travel.

The Marathon is designed with a high-quality harness system that boasts a no-rethread feature, allowing for easy adjustments as your child grows. This makes securing your child easier and ensures that the harness fits snugly at all times, maximizing safety and comfort. The car seat also features two recline positions that promote an optimal fit in various vehicles, providing versatility as well as comfort for your child.

Comfort is not overlooked in the Britix Marathon. The seat is generously padded with premium materials that provide a soft and cozy ride for little ones. In addition, it is equipped with breathable fabrics that help regulate temperature, ensuring your child stays comfortable throughout your journey, regardless of the weather conditions.

Parents will appreciate the ease of installation that the Marathon offers. The car seat is compatible with both the LATCH system and the vehicle seat belt, giving caregivers flexibility and convenience. An integrated lock-off helps secure the seat belt, adding an extra layer of safety during installation.

The Britix Marathon is also easy to clean, featuring a removable and washable cover. This practical design consideration helps maintain hygiene. With its blend of functionality, safety, and comfort, the Britix Britix Marathon stands out as an excellent choice for families looking for a reliable and trustworthy convertible car seat.
Top Page Image Contents