Britax Britix Marathon manual Care and Maintenance

Page 18

Care and Maintenance

Cover Removal

WARNING:

DO NOT take apart or attempt to take apart the harness. It is unnecessary and dangerous to do so.

NEVER remove the buckle tongues from the harness. They cannot be reattached after removal..

1�Loosen the harness by lifting the harness-adjuster lever while pulling the shoulder straps forward as far as possible..

2�Unhook the shoulder straps from the yoke on the rear of child restraint..

3�Remove the belly pad from the buckle..

4�Pull upper harness straps through the shell and cover, to the front of the restraint..

5�Gently remove the upper portion of the cover. Be careful not to damage the energy-absorbing foam..

6�Pull the lower harness straps, buckle tongues, chest clip, and buckle through the slots in the cover..

7�Remove the entire cover from the restraint..

Refitting the Cover

To refit the cover, reverse above directions.. Make sure that the shoulder straps are threaded through the chest clips and that the harness is not twisted..

Care and Maintenance

Cleaning the Cover

•HAND WASH using cold water and mild soap..

•LINE DRY to prevent cover from shrinking..

•DO NOT bleach, machine wash, machine dry, or iron..

Cleaning the Shell

•SPONGE CLEAN using warm water and mild soap..

•TOWEL DRY

•DO NOT use solvents, abrasive cleaners, or disassemble the harness..

Cleaning the Harness

•SPONGE CLEAN using warm water and mild soap..

•TOWEL DRY

•DO NOT bleach, machine wash, machine dry, or disassemble the harness..

Cleaning the Harness Adjuster

Periodically check the adjuster area to be sure it is clean and free of food, coins, dirt, and other objects. If debris is present, it must be removed to prevent interference with the adjuster mechanism.

•BRUSH AWAY LOOSE DEBRIS using a soft bristled brush..

•SPONGE CLEAN using warm water and mild soap..

•TOWEL DRY

•DO NOT use solvents, abrasive cleaners, or disassemble the harness..

32

33

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Marathon Table of Contents Page Safety Information Fill out the registration card and mail it in todayRestraint Features HugsVehicle Safety Belts Vehicle Seating PositionsInstallation Rear-Facing Level surface23-25 24, using anchor point RemovalLap-Belt Installation Installation Forward-Facing Your vehicle has Forward-FacingMatic locking retractor ALR, use See Checking Buckle Position onStoring the Latch Connectors Installation Forward-Facing Switching the Latch ConnectorsSwitching the Latch Harness RemovalForward-Facing Installation Installation in AircraftRear-Facing Installation Versa-TetherSee figures B and C for rear-facing installation Using the Versa-TetherRear-Facing Tether Connector Strap Energy-Absorbing TetherUsing the Chest Clip Recline AdjustmentUsing the Buckle Checking Buckle PositionSecuring Your Child 11See Checking Harness Height onChecking Harness Height Adjusting Harness HeightHarness Height Adjustment To Check Harness HeightCare and Maintenance Buckle Removal Cleaning the BuckleThoroughly Rinse using Rethreading the BuckleWarranty Limited ONE-YEAR Warranty

Britix Marathon specifications

The Britax Britix Marathon is a leading convertible car seat designed for parents who prioritize safety, comfort, and usability. This innovative car seat caters to children ranging from 5 to 65 pounds, accommodating infants, toddlers, and preschoolers alike. The Marathon is engineered with a focus on security, featuring advanced safety technologies that set it apart in the crowded market of child restraint systems.

One of the cornerstone safety features of the Britix Marathon is its SafeCell Impact Protection system. This technology includes a base that compresses during a collision, effectively lowering the center of gravity and reducing the risk of seat rotation, which in turn minimizes the force of impact on the child. The car seat also comes equipped with a steel frame that adds an extra layer of strength and stability, reinforcing the overall safety of the seat during travel.

The Marathon is designed with a high-quality harness system that boasts a no-rethread feature, allowing for easy adjustments as your child grows. This makes securing your child easier and ensures that the harness fits snugly at all times, maximizing safety and comfort. The car seat also features two recline positions that promote an optimal fit in various vehicles, providing versatility as well as comfort for your child.

Comfort is not overlooked in the Britix Marathon. The seat is generously padded with premium materials that provide a soft and cozy ride for little ones. In addition, it is equipped with breathable fabrics that help regulate temperature, ensuring your child stays comfortable throughout your journey, regardless of the weather conditions.

Parents will appreciate the ease of installation that the Marathon offers. The car seat is compatible with both the LATCH system and the vehicle seat belt, giving caregivers flexibility and convenience. An integrated lock-off helps secure the seat belt, adding an extra layer of safety during installation.

The Britix Marathon is also easy to clean, featuring a removable and washable cover. This practical design consideration helps maintain hygiene. With its blend of functionality, safety, and comfort, the Britix Britix Marathon stands out as an excellent choice for families looking for a reliable and trustworthy convertible car seat.
Top Page Image Contents