Avent manual Avent Isis Breast Pump parts, With your Isis Breast Pump

UK

2. AVENT ISIS Breast Pump parts

UK

5. Using the AVENT Disposable System

with your ISIS Breast Pump

PUMP

a)Funnel cover

b)Let-down massage cushion

c)Pump cover

d)Silicone diaphragm and stem*

e)Handle

f)Pump body and funnel

g)White valve*

BOTTLE

h)Reusable bottle (125ml/4oz) or Disposable Bottle System

i)Stand

j)Dome cap

k)Newborn teat (0m+)

l)Screw ring

m)Travel cover

n)Sealing disc *spares included

Simply replace the reusable AVENT bottle with the AVENT Disposable Bottle Holder fitted with a disposable bottle bag.

6.How to assemble your AVENT ISIS Breast Pump

Separate all parts and ensure pump has been cleaned and sterilised as in section 3:

3. To clean and sterilise your pump

Before you use your breast pump for the first time and every time before use:

Separate all parts, then wash in the dishwasher or in warm soapy water and rinse. Do not use antibacterial cleaners/detergents. Sterilise in an

AVENT Steam Steriliser (electric or

microwave), or by boiling

for 10 minutes or in a chemical sterilising

solution, following the manufacturer’s

guidelines. If using an AVENT Steam Steriliser,

the pump will remain sterile in the Steriliser for 3 hours provided the lid is not removed.

4.To keep your pump sterile and compact for travel

After sterilising all parts, you can clip the cover (a) over the funnel and let-down massage cushion and screw the travel cover (m) onto the pump body (f) in place of the bottle or bottle holder.

1Wash your hands thoroughly. Click the white valve (g) into the pump body (f) from underneath making sure the flat side of the valve is downwards.

2Place the pump body (f) onto the bottle (h).

3Twist gently clockwise until it ‘clicks’ in place. DO NOT OVERTIGHTEN

4Place the silicone diaphragm and stem (d) into the pump body (f). Make sure it fits securely round the rim by pressing down with your fingers to ensure a perfect seal. (This is easier if assembled whilst wet.)

5Place the forked end of the handle (e) under the diaphragm stem (d) and push down gently on the handle until it clicks into place.

6Carefully insert the let-down massage cushion (b) into the pump funnel (f) making sure it is perfectly sealed all round the rim of the funnel. (This is easier if assembled whilst wet.)

7Click the pump cover (c) onto the pump body (f). To make the pump completely stable insert the bottle into the stand (i).

7. When to use your AVENT ISIS Breast Pump

1If possible, wait until your milk supply and breastfeeding schedule are well established, normally at least 2-4 weeks after birth, unless told otherwise by your doctor or breastfeeding adviser

2 3