Filter Changing and Cleaning
Upper dust bin Bac à poussière supérieure Cubo de basura superior
Lower dust bin
Bac à poussière
Inférieur
Cubo de basura inferior
➢Check primary filter frequently and clean when dirty.
➢To remove primary filter, open upper dust bin lid assembly. Turn the upper dust bin to the unlock position as shown.
➢While holding primary filter over a trash container grasp filter, push sideways and remove filter from upper dust bin.
➢Clean primary filter by gently tapping over a trash container. Tap on several sides to ensure best cleaning.
➢Rinse with water only as needed. Do not use any detergent or soap.
➢Allow the filter to dry for 24 hours before putting it back into the vacuum cleaner.
➢When cleaning the filter no longer restores vacuum cleaner suction to full power you need to replace the filter.
Locking Tabs |
Languettes de |
fixation |
Lengüetas de |
fijación |
TO REPLACE PRIMARY FILTER
➢With slot side on filter facing the dust bin, slide the filter’s opening over the cleaning cam, and then push filter until it locks onto tabs in dust bin.
Note: Under normal use and care, your filter can be expected to last up to 5 years.
- 34 -