Attachments
| Air Turbine | |
| Turbine à air | |
| Turbina de aire | |
| Crevice Tool | |
| Suceur plat | |
Dusting Brush | Herramienta | |
para tapices | ||
Brosse à | ||
| ||
épousseter |
| |
Cepillo para |
| |
sacudir |
| |
| Wand | |
| Tube | |
| Tubo |
Identify each of the attachments shown.
Note: The motor protector may open when using attachments or when clean- ing new carpet, due to reduced airflow by the attachments themselves or by new carpet lint filling the dust bin quickly.
Note: When using attachments make sure the vacuum cleaner is in the upright position and the Carpet/ Bare Floor selector is in the BARE FLOOR position.
➢Remove the upper end of the hose that is attached to the connector pipe by grasping the hose connector, twisting and pulling straight out. The attachments can now be added to the hose.
➢Remove dusting brush from the vacuum cleaner. Place back in its appropriate storage location.
➢Remove extension wand from the side of the vacuum cleaner. Place back in its appropriate storage location.
➢Remove crevice tool from inside of the wand. Place back in its appropriate storage location.
➢Remove Air Turbine from the vacuum cleaner. Place back in its appropriate storage location.
- 26 -
