Removing Clogs
Connector Pipe
Tube connecteur
Tubo conector
Short Hose
Tuyau court
Manguera corta
If the vacuum cleaner does not seem to have adequate suction, first check if the dust bin is full or if a filter is clogged.
➢ Check the hose area. |
➢ Remove extension hose by grasping |
the hose collar, twisting, and pulling |
straight off. |
➢ Visually inspect the hose and the |
base area into which the hose is |
connected. |
➢ Remove any visible clog. |
➢ |
connector pipe. |
➢ Plug in the vacuum cleaner and turn it |
on. |
➢ Stretch the hose to maximum length |
and then allow the hose to return to its |
storage length. |
➢ Turn off and unplug the vacuum |
Secondary
Filter Screen
Tamis filtrant
Filtro secundario
Suction Inlet Entrée d’aspiration Entrada de aspiración
Hose Inlet
Entrée du tuyau Entrada de manguera
A B
B
A
Hose Coupling Accouplement de tuyau Acoplamiento de manguera
cleaner. |
➢ Remove dust bin and check |
secondary filter screen for clogs. |
➢ If the dust bin, filter areas and the |
hose areas are free of clogs, check |
the nozzle area. |
➢ Return the vacuum cleaner to the |
upright position before plugging into |
an electrical outlet. |
- 54 -