Assembling and Using your Stroller
!To ensure safe operation of your stroller, please follow these instructions carefully.
Unpacking the Product
•Carefully remove stroller and all parts from the box and plastic bag.
•Identify the parts (stroller, front wheels (2), rear wheels (2), canopy (2), tray (2), car seat carrier support (2), rear axle, small washer (2), large washer (4), spring washer (2), snap pin (2), hub cap (2), red plastic cap, and documents) with the pictures in Figures 1a and 1b.
NOTE: The rear axle is attached with red tie wraps to the rear frame tube.
Please carefully detach the axle from the frame and remove the yellow foam from the ends of the axle for installation. Also, extra washers and snap pins may be included.
•Discard all packaging materials properly.
•Remove the plastic coverings from all foam handles and any other areas of the product and discard also.
•DO NOT allow children to play with any packaging materials.
Figure 1a
Figure 1b
Small Washer (2) Large Washer (4) Spring Washer (2) Snap Pin (2) | Hub Cap (2) |
Red Plastic Cap
! CAUTION
Adult assembly is required for this product. This package contains small
parts. Keep all small parts away from children during assembly.
No Tools required.
The Big Caboose | Page 2 |