TRAILER/STROLLER ASSEMBLY
To attach axle to shell
WARNING: This product uses nylon lock nuts to help eliminate loosening of fasteners from vibration of trailer/stroller. When tightening lock nuts, the bolts must extend through the nuts completely.
Step 1. Place folded frame on floor with seat portion facing up (Figure A). Standing behind the trailer/stroller lift up on the top of the canopy (Figures B and C). Next, lock the two black latches into place by locking them on the side rails (Figure D). Insert locking pin through hole in the frame and the black latch (Figure E). Finally, lock loop end over the end of the pin (Figure F).
A
B
Side
Folding 
Rail
C
Side
Folding 
Rail
Side
Support
Rail
D
Back
Latch
E
Back
Latch
Locking
Pin
F
Locking
Pin
Side
Support
Rail
3