IX. Maintenance

Grease the wheel-pivot assembly twice a year (monthly under wet, dirty, salty conditions). Use a standard grease gun with multi- purpose (thick brown, or green) grease and insert into the hole on pivot casing (1). Wipe clean all the old grease that ﬂushes out. This can be done by your local bike shop or gas station while you wait.

1Inspect handle, receivers, parking brake and wheel pivot monthly. Replace any loose or damaged parts.

Burley Walk n’ Roller Limited Warranty

Burley will repair or replace any Walk n’ Roller parts it determines to be defective for the life of the trailer. The owner of a Burley trailer with Walk n’ Roller parts installed must present the trailer for repair at an authorized Burley dealer, together with an original sales receipt or similar proof of purchase. This warranty applies to the original owner and is non-transferable. Burley cannot be responsible for failure due to improper assembly, modiﬁcation of parts or instructions, neglect, abuse, accident, and/or normal wear.

The warranty does not cover any trailers used for rental, competition, or commercial use, nor does it cover Walk n’ Roller parts used on anything other than a Burley trailer.

Burley neither assumes nor authorizes any person to assume any other liability in connection with Burley trailers, and there are no oral agreements or warranties collateral to or affecting this agreement.

This warranty gives you speciﬁc legal rights. You may also have other rights which vary from state to state.

Burley Design Cooperative

4020 Stewart Road • Eugene, Oregon 97402 USA

(541)687-1644 • Fax (541) 687-0436 www.burley.com

“Burley” is a registered trademark of Burley Design Cooperative

Burley d’Lite is a trademark of Burley Design Cooperative Burley Encore is a trademark of Burley Design Cooperative Burley Lite is a trademark of Burley Design Cooperative

rev: 10/04